Three Details When Choosing Wiping Equipment
Observe contact position and reciprocating motion, then assess the actual material, dimensions and cleanliness requirements.
Read news items：Three Details When Choosing Wiping EquipmentNEWS & INSIGHTS
News & Insights
Company updates, equipment developments and technical insights from HULK ROBOT.
Found 9 news items
Automatic Wiping in Operation
Workpiece positioning, contact and reciprocating motion. The edited clip is not a complete machining cycle or a capacity specification.
Read news items：Automatic Wiping in OperationBefore and After Wiping
The camera angles and lighting differ. Actual results must be assessed by inspecting real parts and testing representative samples.
Read news items：Before and After WipingWhich Resin Lens Processes Should Be Automated First?
Start with handling, tray changes and process waiting; assess standalone machines, cells or line integration instead of pursuing equipment count.
Read news items：Which Resin Lens Processes Should Be Automated First?Which Lenses, Glass and Transparent Parts Can Be Assessed for Automatic Wiping?
Wiping is not limited to lenses. Transparent consumer-electronics parts and glass panels can be assessed, but a material name cannot replace sample testing.
Read news items：Which Lenses, Glass and Transparent Parts Can Be Assessed for Automatic Wiping?Automatic vs. Manual Wiping: What Should You Compare?
Compare cleaning consistency, surface protection, consumables, changeovers and acceptable-part output, not just actions per hour.
Read news items：Automatic vs. Manual Wiping: What Should You Compare?AI Lens Appearance Inspection: Sample Testing and Acceptance
Define defects and acceptance boundaries, then verify imaging, recognition and actual cycle time. An accuracy figure without test conditions is not an acceptance standard.
Read news items：AI Lens Appearance Inspection: Sample Testing and AcceptanceA Staged Retrofit for an Existing Resin Lens Line
Progress from reviewing the existing process to validating a machine, connecting operations and defining line boundaries, with clear interfaces and acceptance conditions.
Read news items：A Staged Retrofit for an Existing Resin Lens LineResin Lens Edging: Chamfering, Capacity and Chip Collection
Programmable upper/lower chamfering supports separate or simultaneous A/B-side processing. Approximately 900 lenses/hour is the reference figure in the equipment description.
Read news items：Resin Lens Edging: Chamfering, Capacity and Chip Collection